Electrodes for Kromschröder Industrial Burners

Kromschröder’s industrial burners contain two electrode rods; one for ignition, and one for ionization (sensing). These are consumable items, and spares are periodically required. Combustion 911 carries the pieces needed to make Kromschröder electrode rods.

Electrode Drawing

There are dozens of electrode rod models used in Kromschröder burners. If you know the 8-digit Kromschröder part number, that should be all we need. If you don’t have this number, we’ll need the data from the burner name plate (shown below). Most electrode rods are made-to-order: send burner details or a picture of the burner nameplate to support_ab@combustion911.com.

Please note: Kromschröder electrode rods are only one part of a three-part assembly. The electrode rod is connected to a spark plug using a spring clip connector. We stock spark plugs and spring clip connectors, though in many cases you may only need the electrode rod.

Buy Now Options

Model and Description	Stock	Price	Cart
34472920 Ionization Electrode for ZAI Pilot Burner
34472941 Ignition Electrode for ZAI Pilot Burner

Related Accessories

Model and Description	Stock	Price	Cart
04115301 4mm right angled Electrode Boot, Spiked cable end
04115308 4mm right-angled interference supressed Electrode Boot, screw cable end
04115302 4mm straight Electrode Boot, screw cable end, for ZAI ionization electrode
04115306 6mm straight interference supressed Electrode Boot, screw cable end, for ZAI ignition electrode
04115309 4mm right-angled silicone rubber Electrode Boot, screw cable end
04115314 4mm straight ceramic Electrode Boot, screw cable end
75459221 4mm right-angled interference supressed Electrode Boot, screw cable end
C911-A1 Spark Plug
Spring Clip Spring Clip Connector
Ignition Cable High Voltage Ignition Cable; priced per foot, 5' minimum		/ft