Electrode Adapters
- Adapters specific to the ZAI pilot burner
- With an angled (90 degree) shape
- Housing manufactured using silicone rubber
- Housing manufactured using ceramic
- Housing manufactured to meet IP54
Learn More:
Description Documentation Ordering Information
Ordering Information
| Model and Description |
Stock | Price | Cart |
| E BOOTS 01 Plug: 4mm; Cable end: Spiked; Angled shape. |
|||
| E BOOTS 02 Plug: 4mm; Cable end: Screw; Angled shape; Interference suppressed. |
|||
| E BOOTS 03 Plug: 4mm; Cable end: Screw; Straight shape; ZAI Ionization. |
|||
| E BOOTS 05 Plug: 6mm; Cable end: Screw; Straight shape; Interference suppressed; ZAI Ignition. |
|||
| E BOOTS 06 Plug: 4mm; Cable end: Screw; Angled shape; Silicone Rubber. |
|||
| E BOOTS 07 Plug: 4mm; Cable end: Screw; Straight shape; Ceramic. |
|||
| E BOOTS 08 Plug: 4mm; Cable end: Screw; Angled shape; Interference suppressed; IP54. |
Description
The electrode adapters listed on Combustion 911 are used to mate ignition cable to electrode rods in Elster Kromschröder main and pilot burners. Most of these feature a 4mm connector, for latching onto the spark plug end of the electrode rod. This may be either the ignition (spark) electrode or the ionization (sensing) electrode. Elster Kromschröder recommends that interference-suppressed electrode adapters be used on the ignition side, though some prefer to use an interference-suppressed adapter on the ionization side as well.
Each electrode adapter is unique to its brothers. Check the ordering information chart to ensure you're ordering an adapter with the features you require.
