Industrial High-Velocity Burner for Gas EMB-SIK-DA

Characteristics:

Available in 270K to 1MM Btu/hr capacities
Flow ratio = 8:1
Max. working temperature = 2,370°F
Excess air (without secondary air): up to 400%
Excess air (with secondary air): up to 2,000%

Applications:

Fiber covered furnaces
Tunnel or chariot furnaces
Treatment furnaces
Stretching furnaces
Hot air generators
Industrial drying

Learn More:
Description Documentation Ordering Information Accessories

Ordering Information

Model and Description	Model	Capacity	Ignition	Detection	Price	Cart
EMB-2-SIK-DA Capacity: 270K Btu/Hr; Ignition: Direct Spark; Detection: Flame Rod or UV	EMB-2-SIK-DA	270K Btu/Hr	Direct Spark	Flame Rod or UV	Contact Us	Not available for online purchase.
EMB-3-SIK-DA Capacity: 500K Btu/Hr; Ignition: Direct Spark; Detection: Flame Rod or UV	EMB-3-SIK-DA	500K Btu/Hr	Direct Spark	Flame Rod or UV	Contact Us	Not available for online purchase.
EMB-4-SIK-DA Capacity: 1MM Btu/Hr; Ignition: Direct Spark; Detection: Flame Rod or UV	EMB-4-SIK-DA	1MM Btu/Hr	Direct Spark	Flame Rod or UV	Contact Us	Not available for online purchase.

For all other configurations and spare parts Contact Combustion 911

The EMB-SIK series are gas burners used for direct heating. The shape of the silicon carbide flame tube produces an intense flame that allows high heat penetration and better temperature uniformity inside the combustion chamber, due to the high velocity of the combustion products.

The DA burner has a secondary air inlet and the excess air capacity of the burner is up to 2,000%. These burners can be used in low temperature applications where excellent temperature uniformity is required.

The EMB-SIK is a nozzle mix burner; air and fuel are mixed at the combustion head to avoid dangerous backfiring. The particular shape of the combustion head allows adjustments in stoichiometric ratio and in excess air or excess gas.

EMB-SIK burners develop the maximum capacity in stoichiometric ratio with 45 mbar of air pressure. The set-up is simplified due to the special differential pressure plugs that allow for the measurement of air and gas flow. The DA burner is equipped with a secondary air inlet.