TCU6
6 Zone Remote Controller
To be used in conjunction with TraxInterface4
Control up to 6 burner zones without PLC
- 24Vac power sullpy
- 6+1 relay outputs
- 6+1 digital inputs
- RJ45 link cable to TraxInterface4 included
Learn More:
Documentation Description
Documentation
 |
TCU6 Technical Sheet |
Price:
Contact Us to order
Description
TCU6 provides all the advantages of TraxBustm fieldbus management, without the need for a PLC and therefore without programming.
Six burners or zones of burners can be simply controlled with an electrical interface:
- Input from THERMOSTAT contact start/stop the burner(s)
- Output contact BURNER ONE if at least on burner within a zone is running
For all burners connected:
- Input from UNLOCK button reset all burners in lockout
- Output contact LOCKOUT if at least one of the linked burners is in lockout
TCU6 is an expansion unit to be used together with TraxInterface4, connected to the service port.
Procedure
1.Set ZONE and UNIT to be assigned to the QBK device
2. Press the button to put the QBK device in MANUAL SHUTDOWN
3. Point QUID toward the QBK device pushbutton at a distance of 30-60 cm (12-24”)
4. Press the QUID key
If the configuration is successful, the green OK indicator will illuminate. In case of error, the red KO indicator will illuminate.
