Combustion 911 Header Background

Supplying and Serving
the Combustion Industry
An Olsträd Corporation Company

Combustion 911 Header Background

Industrial Combustion Products

Flame Safety and Burner Controls | Valves | Pressure Switches | Burners | Regulators | Actuators | Ignition and Monitoring Components | Orifice Assemblies | Accessories

Industrial Gas Valves

Butterfly Valves

Butterfly Valve VF

Butterfly Valve VF

Elektrogas VF butterfly valves are designed for regulation and control of gas flow and air flow in combustion processes. Max Temperature 140°F.

Butterfly Valve VFH

Butterfly Valve VFH

Elektrogas VFH butterfly valves are designed for regulation and control of gas flow and air flow in combustion processes. Max Temperature 482°F.

Butterfly Valve BVG

Butterfly Valve BVG

The butterfly valve BVG is designed to adjust volumes of gas, cold and hot air, and flue gas on various appliances and flue gas lines. The BVG is a butterfly valve with reduced nominal diameter (reduced by one or two nominal sizes) and can be used to achieve higher control accuracy.

Butterfly Valve BVH

Butterfly Valve BVH

The butterfly valve BVH is designed to adjust volumes of gas, cold and hot air, and flue gas on various appliances and flue gas lines. The butterfly valve BVH is used for processes that require very precise adjustment of the flow rate or low leakage. In conjunction with the stop bar, the valve disc ensures very low leakage rates.

Butterfly Valve BVHM

Butterfly Valve BVHM

The butterfly valve BVHM is well suited to intermittent operation due to the large number of operating cycles in conjunction with the solenoid actuator MB 7.

Butterfly Valve BVHS

Butterfly Valve BVHS

The butterfly valve BVHS with safety closing function is used with the actuator IC 40 in systems where it is important that in the event of a main voltage failure, the valve closes preventing air streaming into the furnace without being under control.

Butterfly Valve DKR..F

Butterfly Valve DKR

Butterfly valve DKR is designed to adjust volumes of hot air and flue gas on various appliances and flue gas lines. It can be used for a control ratio of up to 1:10.

Solenoid Valves

Solenoid Valve VMR

Solenoid Valves VMR

The Elektrogas Solenoid Valve for Gas VMR (Fast Open, Fast Close) is designed for use as air or gas blocking and releasing controls.

Solenoid Valve VMR

Solenoid Valves VML

The Elektrogas Solenoid Valve for Gas VML (Slow Open, Fast Close) is designed for use as air or gas blocking and releasing controls.

Solenoid Valve VMR..OTN

Solenoid Valves VMR..OTN

The Elektrogas Solenoid Valve for Gas VMR..OTN is designed for use as air or gas blocking and releasing controls.

Solenoid Valve VRA

Solenoid Valves VRA, VLA, VTA

VRA, VLA, VTA Elektrogas Solenoid Valves are normally closed for cold combustion air regulation (open when energized). Suitable for high/low control of combustion air in industrial gas burners.

Double Solenoid Valve for Gas VMM

Solenoid Valves VMM

The Elektrogas Double Solenoid Valve for Gas VMM is designed for use as air or gas blocking and releasing controls.

Solenoid Valve for Gas VAS

Solenoid Valves for Gas VAS

Solenoid Valve VAS is designed for safeguarding and controlling the air and gas supply to gas burners and gas appliances.

Double Solenoid Valve for Gas VCS

Double Solenoid Valves for Gas VCS

Double Solenoid Valve VCS is designed for safeguarding and controlling the air and gas supply to gas burners and gas appliances.

Gas/air ratio control with Solenoid Valve VAG

Gas/Air Ratio Control with Solenoid Valve VAG

Gas/Air ratio control with solenoid valve VAG maintains a constant air/gas pressure ratio for modulating-controlled burners or with VAS 1 bypass valve for stage-controlled burners.

Gas Regulator with Solenoid Valve VAD

Gas Regulator with Solenoid Valve VAD

The gas regulator with solenoid valve VAD with high control accuracy, is for excess air burners, atmospheric burners, or single-stage forced air burners. Pressure preset via setpoint spring.

Variable Gas/air ratio control with Solenoid Valve VAV

Variable Gas/Air Regulator with Industrial Solenoid Valve VAV

Variable air/gas ratio control with Solenoid valve VAV is designed to maintain a constant gas/air pressure ratio for modulating-controlled burners. Pressure preset by the air control line.

Flow Rate Regulator with Solenoid Valve VAH

Flow Regulator with Industrial Solenoid Valve VAH

Flow rate regulators VAH are used to maintain a constant gas/air ratio for modulating-controlled and stage-controlled burners.

Solenoid Valve for Air VR

Solenoid Valve for Air VR

VR solenoid air valves are for on/off or high/low control of air flow for combustion systems. Their continuous duty capability makes them especially well suited to withstand the continuous cycling of frequency firing combustion control systems.

Ball Valves

T100NE Ball Valves

T100NE Ball Valves

System 6 ® SuperBall™ Valve

JoFlo Ball Valves

JoFlo Ball Valves

Full Port Brass Ball Valves

Vent Valves

Vent Valve VMRNA

Vent Valve VMRNA

The Elektrogas VMRNA is a normally open vent valve which closes when energized.

Vent Valve VAN

The VAN vent valve is for venting the area between the main shut-off valve and the block valve in the main gas train.

Linear Control Valves

Control Valve LMV

Linear Control Valve LMV

The Elektrogas modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow.

Safety Relief Valves

Safety Relief Valve VSBV

Safety Relief Valve VSBV

The VSBV reduces temporary pressure surges caused by fluctuations in system operation downstream from the pressure reducing regulator. It is required for use with the Regulator JSAV Overpressure Shut-off Valve.

Safety Shut-off Valves

Solenoid Safety Shut Valve for Gas VAS

Safety Shut-off Valve VAS

Solenoid Valve VAS is designed for safeguarding and controlling the air and gas supply to gas burners and gas appliances.

Safety Shut-off Valve VAG

Safety Shut-off Valve VAG

Gas/Air ratio control with solenoid valve VAG maintains a constant air/gas pressure ratio for modulating-controlled burners or with VAS 1 bypass valve for stage-controlled burners.

Safety Shut-off Valve VAD

Safety Shut-off Valve VAD

The gas regulator with solenoid valve VAD with high control accuracy, is for excess air burners, atmospheric burners, or single-stage forced air burners. Pressure preset via setpoint spring.

Overpressure Shut-off Valve JSAV 50 to 100

Gas Pressure Regulator with Overpressure Shut-off Valve JSAV

Use the JSAV regulator to protect against high pressure for valves downstream from a gas regulator.

Needle Valves

Needle Valve NV

Needle Valve NV

Needle Valve NV is used for fine adjustment of gas flow and air flow in industrial combustion processes. 7.25 and 90 PSI models. Special orders available.

Limiting Orifice Valve (Manual Gas Adjuster)

Limiting Orifice Valve Manual Gas Adjuster GAF

Limiting Orifice Valve GAF

Limiting orifice valve GAF gas adjusters are designed to provide accurate flow control.

Pressure Relief Valves

Pressure Relief Valve VS

Pressure Relief Valve VS

The Elektrogas VS is a pressure relief valve designed to reduce temporary pressure surge in burning appliances.

Pressure Switches

Pressure Switches for Gas and Air

Pressure Switch for Gas and Air C911-P

C911-P Industrial Pressure Switch

The C911-P monitors gas or air pressure in a pipeline and activates switch contacts according to the pressure set point. FM Approved.

Pressure Switches for Gas

Pressure Switch for Gas DG

DG Industrial Gas Pressure Switch

Industrial diaphragm gas pressure switches with micro switch for monitoring gas pressures on industrial installations, for gas and air, also suitable for biologically produced methane, with hand wheel for adjusting the switch-on point. FM and UL approved.

Pressure Switch for Gas DG..VCT

DG..VCT Industrial Gas Pressure Switch

The DG..VCT gas pressure switch monitors the increasing or decreasing positive pressure of natural gas, town gas, LPG, flue gas, biologically produced methane, and air, for example, on a gas control line. FM and UL approved.

Pressure Switches for Air

Pressure Switch for Air DL 3A

DL Industrial Air Pressure Switch

DL industrial air pressure switches provide accurate, reliable supervision of air pressure for both industrial and commercial combustion systems, boilers, HVAC systems, and a wide variety of other applications.

Burners, Pilot Burners, and Burner Tubes

Package Burners

Industrial Burner for Gas MXS

MXS Package Burner

Package burner with a maximum capacity up to 2300 kW (7.8MM BTU/Hr).

Industrial Burner for Gas FC

FC Package Burner

Package burner for fixed air, modulated gas control; 500K - 1.5MM Btu/hr

Industrial Burner for Gas EPB

EPB Package Burner

Package burner with modulating air valve; 270K - 5MM Btu/hr.

Medium Velocity Burners

Industrial Burner for Gas EMB

EMB Medium Velocity Burner

Medium velocity burner with alloy combustor; 70K - 8.5MM Btu/hr.

Medium Velocity Radiant Tube Burners

Industrial Burner for Gas RT

RT Medium Velocity Radiant Burner

Medium velocity burner for radiant tube firing; 100K - 1MM Btu/hr.

High Velocity Burners

Industrial Burner for Gas EMB-SIK

EMB-SIK High Velocity Burner

High velocity burner with silicon carbide combustor; 70K - 3MM Btu/hr.

Industrial Burner for Gas EMB-SIK-DA

EMB-SIK-DA High Velocity Burner

High velocity burner with silicon carbide combustor and secondary air capability; 270K - 1MM Btu/hr.

Industrial Burner for Gas EMB-SIK-NxT

EMB-SIK-NxT High Velocity Burner

High velocity burner with silicon carbide combustor and NxT technology for low NOx and CO emissions; 340K - 2.3MM Btu/hr.

Industrial Burner for Gas REKO-SIK-NxT-FF

REKO-SIK-NxT-FF High Velocity Burner

High velocity self-recuperative burner with silicon carbide combustor and NxT technology for low NOx and CO emissions; 100K - 1.35MM Btu/hr.

High Velocity Radiant Tube Self Recuperative Burners

Industrial Burner for Gas REKO-SIK-NxT-RT

REKO-SIK-NxT-RT High Velocity Radiant Tube Self Recuperative Burner

High velocity self-recuperative burner for radiant tube firing with NxT technology for low NOx and CO emissions; 50K - 500K Btu/hr.

Flat Flame Burners

Industrial Burner for Gas ESW

ESW Flat Flame Burner

Flat flame burner; 300K - 4.75MM Btu/hr.

High Velocity Self Recuperative Flat Flame Burners

Industrial Burner for Gas REKO-SIK-NxT-SW

REKO-SIK-NxT-SW High Velocity Self Recuperative Flat Flame Burner

Flat flame self-recuperative burner with NxT technology for low NOx and CO emissions; 340K - 820K Btu/hr.

Ribbon Burners

Industrial Ribbon Linear Flame Burners for Gas AB and ABM

AB and ABM Ribbon Burner

Ribbon linear flame burners; 68K - 220K Btu/hr.

Kromschroder Burners

Industrial Burner for Gas BIC

Industrial Burner BIC

The Kromschroder BIC and BIC(A) burners use TSC silicone carbide tube sets to serve as the combustion chamber. The wide capacity range of these burners (up to 450 kW) ensures that we have the right burner to fit your application.

Industrial Burner for Gas BIO

Industrial Burner BIO

The Kromschroder BIO industrial burner is designed for industrial furnaces and firing systems in the iron and steel industries in the precious, non-ferrous, and light metal sector, as well as in the plastics, fiber, and paper industries.

Industrial Burner for Gas ZIC

Industrial Burner ZIC

The Kromschroder ZIC industrial burners use a lightweight tube manufactured from a high quality SiC silicone carbide. The silicone carbide tube is well-suited for installations using ceramic fiber insulation and brick linings.

Industrial Burner for Gas ZIO 40

Industrial Burner ZIO

The Kromschroder ZIO industrial burner is designed for industrial furnaces and firing systems in the iron and steel industries in the precious, non-ferrous, and light metal sector, as well as in the plastics, fiber and paper industries.

Pilot Burners

Ionization Pilot Burner ZAI

Pilot Burner ZAI

The ionization pilot burner ZAI is for the safe ignition and flame protection of atmospheric burners in conjunction with automatic burner controls IFS and the PF-19 burner control system.

Ionization Pilot Burner ZKIH

Pilot Burner ZKIH

The ionization pilot burner ZKIH is designed for the safe ignition and ionization control of gas burners in conjunction with automatic burner controls IFS and the PF-19 burner control system.

Ionization Pilot Burner ZMI

Pilot Burner ZMI

The ionization pilot burner ZMI is designed for the automatic ignition and control of gas burners, in conjunction with automatic burner controls IFS and the PF-19 burner control system and the ignition transformer TGI.

Burner Tubes

Ceramic Burner Tubes TSC

Burner Tube TSC

The burner can be used in conjunction with the ceramic tube set TSC in furnaces with brick lining or ceramic fiber lining. No burner quarl is required to serve as a combustion chamber.

Flame Safety and Burner Controls

Burner control Q2 from Contrive

Q2 Parametric Burner Controller

Contrive Q2 is a burner control device that controls gas and oil burners for continuous or intermittant operation.

Flame Detector QZero

QZERO Flame Detector

QZERO is a simple flame switch for monitoring the presence of flame via flame rod or UV.

Burner control ESTRO

ESTRO Burner Control

Microprocessor operated burner control device that controls gas and oil burners for continuous operation.

Automatic Burner Control Unit IFD 258

IFD 258 Burner Control

Burner control unit for use in multi burner systems and single burner systems.

Flame Relay IFW15

IFW15 Flame Relay - DISCONTINUED

Flame relay to detect and signal an existing flame using flame rod or UV-detector.

BCU Burner Control Units

Burner control BCU 370

The BCU (burner control unit) 370 controls, ignites, and monitors industrial forced air burners of unlimited capacity in intermittent or continuous operation.

Burner control BCU 560

Burner control BCU 560 controls, ignites and monitors gas burners in intermittent or continuous operation. They can be used for directly ignited industrial burners of unlimited capacity. The burners may be modulating-controlled or stage-controlled. Fast reaction times makes the BCUs suitable for frequent cycling operation.

Burner control BCU 565

Burner control BCU 565 controls, ignites and monitors gas burners in intermittent or continuous operation. They can be used for directly ignited industrial burners of unlimited capacity. Features extended air control.

Burner control BCU 570

Burner control unit BCU 570 controls, ignites and monitors industrial individual burners and forced draught burners of unlimited capacity in intermittent or continuous operation. It can be used for directly ignited burners or burners ignited by a pilot burner.

Burner control BCU 580

Burner control unit BCU 580 controls, ignites and monitors gas burners in intermittent or continuous operation.

Burner control BCU 460

BCU 460 - DISCONTINUED

The BCU (burner control unit) 460 is for directly ignited burners of unlimited capacity (air valve control optional). The unit ignites and monitors gas burners for intermittent or continuous operation.

Burner control BCU 465

BCU 465 - DISCONTINUED

The BCU (burner control unit) 465 enhances the features of BCU 460 by adding Proof of Closure switch monitoring and purge timing. It is for directly ignited burners of unlimited capacity (air valve control optional).

Burner control BCU 480

BCU 480 - DISCONTINUED

The BCU (burner control unit) 480 controls, ignites, and monitors gas burners for intermittent or continuous operation. Its fully electronic design reacts quickly to various process requirements and is therefore suitable for frequent cycling operation.

PF-19 Burner Control System

Burner Control Unit PFU 760

Automatic Burner Control Unit PFU 760

The PFU 760 is designed specifically for directly ignited burners of unlimited capacity in intermittent operation or in continuous operation.

Burner Control Unit PFU 780

Automatic Burner Control Unit PFU 780

The PFU 780 is designed specifically for pilot and main burners of unlimited capacity in intermittent operation or in continuous operation.

Flame Relay PFF 704

Flame Relay PFF 704

Flame detector in 19″ standard rack for multi-flame control in conjunction with PFU or for flame signalling.

Power Supply PFP 700

Power Supply PFP 700

Power supply in 19″ standard rack for supplying the control inputs on automatic burner control units PFS, FM approved.

PFA 700N with PROFIBUS plug

Field Bus Interface PFA 700N

19″ module for interworking of up to nine automatic burner control units PFS, PFD or PFU 778L with industrial communication networks.

Relay Module PFR 704

Relay Module PFR 704

Relay card for 19″ standard rack, for signal coupling, FM approved.

MPT 700 Impulse System

Impulse System MPT 700 - DISCONTINUED

19″ module for converting a controller signal to pulse cycles for gas burners.

Regulators

Gas/Air Ratio Regulators

Gas/Air Ratio Regulator RAG

Gas/Air Ratio Regulator RAG

Elektrogas RAG regulators maintain a constant air-gas ratio suitable for use with non-aggressive gases.

Gas/Air Ratio Regulator GIK

Gas/Air Ratio Regulator GIK

GIK regulators hold constant gas/air ratios on nozzle mix and premix burner systems. They are designed and built with precise internal tolerances, and they provide highly accurate, repeatable pressure tracking over the turndown range of the burner system.

Variable Gas/Air Ratio Regulator GIKH

Variable Gas/Air Ratio Regulator GIKH

GIKH regulators allow precise, repeatable control of gas/air ratios on preheated air combustion systems where air density is affected by temperature changes.

Gas Pressure Regulators

Gas Pressure Regulator R-125 and RS-125

Gas Pressure Regulator R-125 and RS-125

Pressure reducing regulator designed for inlet pressures up to 180 PSI. Optional over pressure cut-off valve for safeguarding downstream components.

Gas Pressure Regulator R and RF

Gas Pressure Regulator R and RF

The R type is a regulator for gas pipelines according to EN 88. It can be equipped with an integrated filter (type RF) according to DIN3386.

Gas Pressure Regulator GDJ

Gas Pressure Regulator GDJ

GDJ regulators are general-purpose regulators for controlling gas pressure to furnace ovens and other gas-consuming appliances. They are suitable for natural, LP, and clean dry bio-gas at inlet pressures up to 5 psig (350 mbar).

Gas Pressure Regulator VGBF

Gas Pressure Regulator VGBF

VGBF regulators are general-purpose regulators for controlling gas pressure to furnaces, ovens, and other gas consuming equipment. They are suitable for natural, LP, and clean biogas at inlet pressures up to 60 psig (4 bar).

Overpressure Shut-off Valve JSAV 50 to 100

Gas Pressure Regulator with Overpressure Shut-off Valve JSAV

Use the JSAV regulator to protect against high pressure for valves downstream from a gas regulator.

Actuators

Elektrogas Actuator MZ

The Elektrogas MZ5 servomotor is designed to operate VF and VFH butterfly valves, used with electronic positioning control of gas and air flow in combustion processes.

Elektrogas Actuator SL

Solenoid Actuators SR, SL, ST

Elektrogas Solenoid actuators SR/SL/ST are designed to operate VF and VFH butterfly valves, used in two-stage control of gas flow and air flow in combustion processes.

Actuator IC 20

The Kromschroder actuator IC 20 is designed for applications that require precise, controlled rotary movement between 0° and 90° and can be mounted directly onto butterfly valve BVG BVH to control gas and air flow rates on gas burners.

Kromschroder Actuator IC 40

The Kromschroder actuator IC 40 is designed for applications that require precise, controlled rotary movement between 0° and 90° and can be mounted directly onto butterfly valve BVG or BVH to control gas and air flow rates on gas burners.

Solenoid Actuator MB 7

Solenoid Actuator MB 7

The Kromschroder solenoid actuator MB 7 serves as a drive for butterfly valve BVHM and can be used for staged control of industrial installations in cold- or hot-air operating modes.

Kromschroder Actuator IC 50

Kromschroder Actuator IC 50 is for applications that require precise, controlled rotary movement between 0 and 90 degrees. IC 50 is designed for applications with high torques of up to 30 Nm.

Ignition and Monitoring Components

Ignition Transformers

COFI Ignition Transformers

COFI Ignition Transformers

Electrical ignition of gas burners with options for ignition only, or ignition and detection with a single electrode

Allenson Ignition Transformer 2260 and 2265

Ignition Transformer 2260 and 2265

Compact, lightweight, and versatile ignition tranformers are designed for constant duty.

ESA Ignition Transformer TAR-10

Ignition Transformer TAR-10

Designed to provide a high-energy ignition spark for industrial burners.

Ignition Transformer TGI

Ignition Transformer TGI

The TGI Ignition Transformer is designed for high-voltage spark ignition of gas burners and gas-ignited or directly ignited oil burners. Die-cast aluminum housing meets the requirements for enclosure IP 65.

Ignition Transformer TZI

Ignition Transformer TZI

The TZI Ignition Transformer is designed for high-voltage spark ignition of gas burners and gas-ignited or directly ignited oil burners. Enclosure fulfills the requirements for enclosure IP 20.

UV Detectors

UV Detector UVS 10

The UVS UV detector monitors gas burners of unlimited capacity with or without fan, on hot-air furnaces, gas-fired boilers, industrial furnaces and excess-gas flaring installations in conjunction with Elster Kromschroder PFU, IFS or BCU automatic burner controls.

Orifice Assemblies

Orifice Assembly OM

Orifice Assembly OM

The OM measuring orifice is used to measure the flow and differential pressure of air or gas through a combustion system

Orifice Assembly VMO

Orifice Assembly VMO

The VMO measuring orifice assembly is designed to connect with valVario valves and regulators. It is a good-value alternative in areas where no standardized measuring orifice is required.

Orifice Assembly FLS

Orifice Assembly FLS

The FLS Orifice Assembly is discontinued and replaced by the VMO model.

Accessories

Ignition Cable

7mm silicone rubber ignition cable sold by the foot.

Electrode Adapters

Straight electrode adapters and plug caps.

VIEW MODELS & DETAILS

C911-74921607 Spring Clip

Spring clip couples spark plugs and electrode rods for industrial burners.

C911-A1 Spark Plug

Spark plug replacement for Kromschroder main burners.

Flow Meter DE

The Flow Meter DE is designed to measure volume and instantaneous flow of natural gas, propane, inert gases, and air. The DE style meter has an LCD display that shows the current volume, the current flow, and date.

VIEW MODELS & DETAILS

Flow Meter DM-N

Fitted with a mechanical counter head, the Flow Meter DM is designed to measure the volume of natural gas, propane, inert gases, and air.

VIEW MODELS & DETAILS

Gas Filter GFK..A

GFK Gas Filters

Gas Filter GFK is used to filter flue gas, nitrogen, and combustion air.

VIEW MODELS & DETAILS

Orifice Assembly VMO

VMO Orifice Assemblies

Orifice assembly VMO for valVario Valves (replaces FLS models).

VIEW MODELS & DETAILS

Pressure Gauge

PG0-60WC Pressure Gauge

The PG0-60WC Low Pressure Gauge accurately measures extreme low pressure conditions.

VIEW MODELS & DETAILS

Valve Proving Controls TC 1 and 2

The tightness control TC checks the fail-safe function of both valves before each start-up or after each shut-down of a system with two safety valves.

VIEW MODELS & DETAILS

Valve Proving Control TC 410

The tightness control TC checks the fail-safe function of both valves before each start-up or after each shut-down of a system with two safety valves. The TC 410 mounts inside a control cabinet, separately from the valve system.

VIEW MODELS & DETAILS

Flex Connector FBC

Flex Connectors

BC and FBC flex connectors absorb thermal and pressure expansions in your pipework.

VIEW MODELS & DETAILS

Combustion 911

600 Mogadore Rd. Kent, OH 44240

Phone 330-678-3683

Email: support_ab@combustion911.com

View Terms and Conditions

©2024 Olstrad Corporation All Rights Reserved

Visit Combustion 911 on LinkedIn

Visit Combustion 911 on Facebook

Visit Combustion 911 on Twitter

Watch Combustion 911 videos on YouTube

Email Combustion 911

Read Articles on the Combustion 911 Blog

Need a quote? Have a Question?

➤