Combustion 911 Header Background
  SubTotal:      View Cart View Combustion 911 Shopping Cart
Combustion 911 Header Background
 

Elektrogas Solenoid Actuators and Butterfly Valves

SR-VF


Elektrogas solenoid actuators SR, SL, and ST operate VFVFH, and VFT butterfly valves in two step control of gas and air flow in combustion processes.

Elektrogas S series actuators are available with fast opening and fast closing (<1s), slow opening (3-4s) and fast closing or with slow opening and slow closing (3-4s). They have two regulating screws for minimum and maximum flowrate adjustment and come with valve disc position indicator.

S series actuators can be used in pulse-fire operations requiring a large number of on/off cycles of valves in the system. Its sturdy and functional design allows a fast and easy installation, and is practically free of maintenance.

There are two sizes of S actuators available; Sx4 which is lighter and used for smaller valves, and the Sx8 can be used with any size Elektrogas valve, but its most commonly used with larger sizes.

The coil, which includes the PC board and enclosure, can be replaced. We also offer the PC board alone, or the cover alone, or the DIN plug.

Fixing Set Point

The Elektrogas S actuator uses a different method for fixing the set point, compared to the competition. If you’ve shied away from solenoid actuators due to frustration with lock nuts that won’t hold their position and set screws that easily strip, you’ll be happy to find these issues aren’t applicable for Elektrogas.

There is a set screw on the bottom of the actuator (fig. 29) that, after removal, allows access to an inner screw that can set the low-fire (fig. 30). Similarly, the top of the unit has a screw (fig. 33) which is used to set the high-fire. (fig. 34) Once the inner screws have been set, simply tighten the set screws back up and you’re finished fixing the set point.

Low Fire Adjustment

High Fire Adjustment

S Accessories

The Set S option is used for mounting SR/SL/ST to VF butterfly valve.

Set ST is used for mounting SR/SL/ST to VFT butterfly valve.

Set D is a pair of heat shields for installation on VFH enabling it to see temperatures up to 840°F

Butterfly Valves

VF, VFT, and VFH butterfly valves are made for regulation and control of gas flow and air flow in combustion processes.

Elektrogas butterfly valves are made of aluminum (VF/VFT) or cast-iron (VFH). They’re suitable for use with air and non-aggressive gases (VF/VFT), and heated air and flue gas (VFH). Low leakage when valve is in closed position (VFH type provided with butterfly disc stop).

The VFH type is provided with a double-eccentricity disc and a spring to reduce the backlash. This results in a high precision adjustment and avoids valve floating.

For Automation

Please visit olstrad.com to learn more about our automation processes!

Posted by  b-olstrad ; Published May 25, 2022

 Categories: Uncategorized



 Bookmark the permalink

 RSS Feed (comments for this post)

Both comments and trackbacks are currently closed.

 
 

Combustion 911

600 Mogadore Rd. Kent, OH 44240

Phone 330-678-3683

Email: support_ab@combustion911.com

View Terms and Conditions

Privacy Policy

©2024 Olstrad Engineering All Rights Reserved

Visit Combustion 911 on LinkedInVisit Combustion 911 on FacebookVisit Combustion 911 on TwitterWatch Combustion 911 videos on YouTubeEmail Combustion 911Read Articles on the Combustion 911 Blog
Olstrad Corporation
ESA Industrial Burners IHEA Member Elektrogas Valves and Regulators

Need a quote? Have a Question?